TEL: 416.449.7275     FAX: 416.449.2614

2259 Markham Road, Scarborough, Ontario, Canada M1B 2W3

River Hill Dental



FR

Contact

TEL: 416.449.7275
FAX: 416.449.2614

Location

2259 Markham Road, Scarborough
Ontario, Canada M1B 2W3

Hours

Mon to Fri: 8:00am – 5:00pm
Sat: 8:00am – 12:30pm

B-Vent

  1. Home
  2. Venting
  3. B-Vent

B-Vent

Description

Applications

- Category 1 Gas Burning Appliances - Approved for Natural Gas (NG), Propane (LP) - Typical usage: intended to be used for Furnaces, HWT, Boilers, Pool Heaters, Unit Heaters, Gas fireplaces, Infrared Tube Heaters

Features & Benefits

– Diameter: 3″- 36″ (insulated 4″- 14″)
– Minimum clearance to combustibles: 1″
– UL/ULC screws are not required to be used in B-Vent manufactured by Don Park because of Don Park’s connection method. For Don Park B-Vents manufactured after March, 2007 screws are permitted to be installed at joints as an optional attachment method but are not mandatory. When using screws they are to be located approximately 1/4″ from the connection joint using a maximum 1/4″ long screws so the  screws do not pierce or deform the inner liner
– Warranty: 1 Year

DOWNLOAD SPEC GUIDE

Part Number Table

B-VENT 3″

Part Number Description UOM Ctn.Qty
BV3B6 (M) 3″ B-VENT 6″ PIPE EA 5
BV3B1 3″ B-VENT 12″ PIPE EA 5
BV3B2 3″ B-VENT 18″ PIPE EA 7
BV3B3 3″ B-VENT 36″ PIPE EA 6
BV3B5 3″ B-VENT 60″ PIPE EA 1
BV3BA (M) 3″ B-VENT 12″ ADJ LENGTH EA 4
BV3BAF (M) 3″ B-VENT ADJ FLSH 1″/12″-6″/12″ EA 2
BV3BAFP (M) 3″ B-VENT ADJ FLSH 7″/12″-12″/12″ EA 2
BV3BBT 3″ B-VENT BELLTOP EA 4
BV3BCC (M) 3″ B-VENT B-C CONN EA 2
BV3BDC (M) 3″ B-VENT DRAFT HOOD CONN EA 15
BV3BE 3″ B-VENT 90DEG EL ADJ EA 6
BV3BE5 (M) 3″ B-VENT 45DEG EL ADJ EA 3
BV3BFS 3″ B-VENT FIRESTOP SPACER EA 2
BV3BFUA (M) 3″ B-VENT UNIV ADAP FEMALE EA 2
BV3BI4 (M) 3″- 4″ B-VENT INCREASER EA 3
BV3BI5 (M) 3″- 5″ B-VENT INCREASER EA 1
BV3BMUA (M) 3″ B-VENT UNIV ADAP MALE EA 1
BV3BSA (M) 3″ B-VENT SUPPORT ASSY EA 4
BV3BSC 3″ B-VENT STORM CLLR EA 10
BV3BT 3″ B-VENT TEE EA 1
BV3BTF 3 B-VENT T/CONE FLASHING EA 4
BV3BTK (M) 3″ B-VENT TEE CAP EA 3
BV3BWB (M) 3″ B-VENT WALL BAND EA 2
BV3BTFAL1 (M) 3″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 4″

Part Number Description UOM Ctn.Qty
BV44BTY (M) 4″ B-VENT TY 4″x 4″x 4″ EA 1
BV4B6 4″ B-VENT 6″ PIPE EA 6
BV4B1 4″ B-VENT 12″ PIPE EA 4
BV4B2 4″ B-VENT 18″ PIPE EA 5
BV4B3 4″ B-VENT 36″ PIPE EA 6
BV4B5 4″ B-VENT 60″ PIPE EA 1
BV4BA 4″ B-VENT 12″ ADJ LENGTH EA 3
BV4BAF 4″ B-VENT ADJ FLSH 1″/12″-6″/12″ EA 4
BV4BAFP 4″ B-VENT ADJ FLSH 7″/12″-12″/12″ EA 4
BV4BBT 4″ B-VENT BELLTOP EA 5
BV4BCC 4″ B-VENT B-C CONN EA 12
BV4BDC 4″ B-VENT DRAFT HOOD CONN EA 12
BV4BE 4″ B-VENT 90DEG EL ADJ EA 8
BV4BE5 4″ B-VENT 45DEG EL ADJ EA 4
BV4BFS 4″ B-VENT FIRESTOP SPACER EA 20
BV4BFUA 4″ B-VENT UNIV ADAP FEMALE EA 5
BV4BI5 4″-5″ B-VENT INCREASER EA 4
BV4BI6 4″-6″ B-VENT INCREASER EA 3
BV4BI8 (M) 4″ B-VENT INCREASER 4″- 8″ EA 1
BV4BMUA 4″ B-VENT UNIV ADAP MALE EA 5
BV4BRT3 (M) 4″ B-VENT TEE 4″x 4″x 3″ EA 1
BV4BSA 4″ B-VENT SUPPORT ASSY EA 4
BV4BSC 4″ B-VENT STORM CLLR EA 10
BV4BT 4″ B-VENT TEE EA 6
BV4BTF 4″ B-VENT T/CONE FLASHING EA 3
BV4BTK 4″ B-VENT TEE CAP EA 10
BV4BWB 4″ B-VENT WALL BAND EA 10
BV4BWT (M) 4″ BV WALL THIMBLE 41/2″ – 7″ EA 2
BV4BTFAL1 (M) 4″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 5″

Part Number Description UOM Ctn.Qty
BV544TY 5″ B-VENT TY 5″x 4″x 4″ EA 3
BV54BTY 5″ B-VENT TY 5″x 5″x 4″ EA 2
BV55BTY (M) 5″ B-VENT TY 5″x 5″x 5″ EA 1
BV5B6 5″ B-VENT 6″ PIPE EA 1
BV5B1 5″ B-VENT 12″ PIPE EA 2
BV5B2 5″ B-VENT 18″ PIPE EA 3
BV5B3 5″ B-VENT 36″ PIPE EA 5
BV5B5 5″ B-VENT 60″ PIPE EA 1
BV5BA 5″ B-VENT 12″ ADJ LENGTH EA 3
BV5BAF 5″ B-VENT ADJ FLSH 1″/12″-6″/12″ EA 8
BV5BAFP 5″ B-VENT ADJ FLSH 7″/12″-12″/12″ EA 1
BV5BBT 5″ B-VENT BELLTOP EA 4
BV5BCC 5″ B-VENT B-C CONN EA 6
BV5BDC 5″ B-VENT DRAFT HOOD CONN EA 8
BV5BE 5″ B-VENT 90DEG EL ADJ EA 4
BV5BE5 5″ B-VENT 45DEG EL ADJ EA 2
BV5BFS 5″ B-VENT FIRESTOP SPACER EA 8
BV5BFUA 5″ B-VENT UNIV ADAP FEMALE EA 2
BV5BI6 5″- 6″ B-VENT INCREASER EA 2
BV5BMUA 5″ B-VENT UNIV ADAP MALE EA 2
BV5BRT4 5″ B-VENT TEE 5″x 5″x 4″ EA 4
BV5BSA 5″ B-VENT SUPPORT ASSY EA 3
BV5BSC 5″ B-VENT STORM CLLR EA 50
BV5BT 5″ B-VENT TEE EA 4
BV5BTF 5″ B-VENT T/CONE FLASHING EA 9
BV5BTK 5″ B-VENT TEE CAP EA 7
BV5BWB 5″ B-VENT WALL BAND EA 6
BV5BWT (M) 5″ BV WALL THIMBLE 41/2″ – 7″ EA 1
BV5BTFAL1 (M) 5″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 6″

Part Number Description UOM Ctn.Qty
BV64BTY 6″ B-VENT TY 6″x 6″x 4″ EA 1
BV65BTY (M) 6″B-VENT TY 6″x 6″x 5″ EA 1
BV66BTY (M) 6″B-VENT TY 6″x 6″x 6″ EA 1
BV6B6 6″ B-VENT 6″ PIPE EA 2
BV6B1 6″ B-VENT 12″ PIPE EA 3
BV6B2 6″ B-VENT 18″ PIPE EA 2
BV6B3 6″ B-VENT 36″ PIPE EA 4
BV6B5 6″ B-VENT 60″ PIPE EA 1
BV6BA 6″ B-VENT 12″ ADJ LENGTH EA 2
BV6BAF 6″ B-VENT ADJ FLSH 1″/12″-6″/12″ EA 12
BV6BAFP 6″ B-VENT ADJ FLSH 7″/12″-12″/12″ EA 6
BV6BBT 6″ B-VENT BELLTOP EA 4
BV6BCC 6″ B-VENT B-C CONN EA 3
BV6BDC 6″ B-VENT DRAFT HOOD CONN EA 3
BV6BE 6″ B-VENT 90DEG EL ADJ EA 3
BV6BE5 6″ B-VENT 45DEG EL ADJ EA 6
BV6BFS 6″ B-VENT FIRESTOP SPACER EA 7
BV6BFUA (M) 6″ B-VENT UNIV ADAP FEMALE EA 1
BV6BI7 (M) 6″- 7″ B-VENT INCREASER EA 2
BV6BI8 (M) 6″- 8″ B-VENT INCREASER EA 2
BV6BMUA (M) 6″B-VENT UNIV ADAP MALE EA 1
BV6BRT4 (M) 6″B-VENT TEE 6″x 6″x 4″ EA 1
BV6BRT5 (M) 6″B-VENT TEE 6″x 6″x 5″ EA 1
BV6BSA 6″ B-VENT SUPPORT ASSY EA 3
BV6BSC 6″ B-VENT STORM CLLR EA 50
BV6BT 6″ B-VENT TEE EA 3
BV6BTF 6″ B-VENT T/CONE FLASHING EA 6
BV6BTK 6″ B-VENT TEE CAP EA 6
BV6BWB 6″ B-VENT WALL BAND EA 6
BV6BTFAL1 (M) 6″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 7″

Part Number Description UOM Ctn.Qty
BV75BTY (M) 7″ B-VENT TY 7″x 7″x 5″ EA 1
BV77BTY (M) 7″ B-VENT TY 7″x 7″x 7″ EA 1
BV7B6 (M) 7″ B-VENT 6″ PIPE EA 2
BV7B1 7″ B-VENT 12″ PIPE EA 3
BV7B2 7″ B-VENT 18″ PIPE EA 3
BV7B3 7″ B-VENT 36″ PIPE EA 3
BV7B5 7″ B-VENT 60″ PIPE EA 1
BV7BA (M) 7″ B-VENT 18″ ADJ LENGTH EA 3
BV7BAF 7″ B-VENT ADJ FLSH 1″/12″-6″/12″ EA 6
BV7BAFP 7″ B-VENT ADJ FLSH 7/12″-12″/12″ EA 1
BV7BBT 7″ B-VENT BELLTOP EA 2
BV7BCC 7″ B-VENT B-C CONN EA 3
BV7BDC 7″ B-VENT DRAFT HOOD CONN EA 3
BV7BE 7″ B-VENT 90DEG EL ADJ EA 2
BV7BE5 7″ B-VENT 45DEG EL ADJ EA 3
BV7BFS 7″ B-VENT FIRESTOP SPACER EA 4
BV7BFUA (M) 7″ B-VENT UNIV ADAP FEMALE EA 1
BV7BI8 (M) 7″- 8″ B-VENT INCREASER EA 1
BV7BMUA (M) 7″ B-VENT UNIV ADAP MALE EA 1
BV7BRT5 (M) 7″ B-VENT TEE 7″x 7″x 5″ EA 1
BV7BSA 7″ B-VENT SUPPORT ASSY EA 3
BV7BSC 7″ B-VENT STORM CLLR EA 7
BV7BT (M) 7″ B-VENT TEE EA 1
BV7BTF 7″ B-VENT T/CONE FLASHING EA 6
BV7BTK 7″ B-VENT TEE CAP EA 1
BV7BWB (M) 7″ B-VENT WALL BAND EA 2
BV7BTFAL1 (M) 7″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 8″

Part Number Description UOM Ctn.Qty
BV84BTY (M) 8″ B-VENT TY 8″x 8″x 4″ EA 1
BV85BTY (M) 8″ B-VENT TY 8″x 8″x 5″ EA 1
BV86BTY (M) 8″ B-VENT TY 8″x 8″x 6″ EA 1
BV88BTY (M) 8″ B-VENT TY 8″x 8″x 8″ EA 1
BV8B6 (M) 8″ B-VENT 6″ PIPE EA 2
BV8B1 8″ B-VENT 12″ PIPE EA 2
BV8B2 8″ B-VENT 18″ PIPE EA 5
BV8B3 8″ B-VENT 36″ PIPE EA 2
BV8B5 8″ B-VENT 60″ PIPE EA 1
BV8BA 8″ B-VENT 18″ ADJ LENGTH EA 5
BV8BAF 8″ B-VENT ADJ FLSH 1″/12″-6″/12″ EA 2
BV8BAFP (M) 8″ B-VENT ADJ FLSH 7″/12″-12″/12″ EA 1
BV8BBT 8″ B-VENT BELLTOP EA 2
BV8BCC (M) 8″ B-VENT B-C CONN EA 2
BV8BDC 8″ B-VENT DRAFT HOOD CONN EA 4
BV8BE 8″ B-VENT 90DEG EL ADJ EA 4
BV8BE5 8″ B-VENT 45DEG EL ADJ EA 4
BV8BFS 8″ B-VENT FIRESTOP SPACER EA 4
BV8BFUA (M) 8″ B-VENT UNIV ADAP FEMALE EA 1
BV8BI10 (M) 8″-10″ B-VENT INCREASER EA 1
BV8BI12 (M) 8″-12″ B-VENT INCREASER EA 1
BV8BI14 (M) 8″-14″ B-VENT INCREASER EA 1
BV8BMUA (M) 8″ B-VENT UNIV ADAP MALE EA 1
BV8BRT4 (M) 8″ B-VENT TEE 8″x 8″x 4″ EA 1
BV8BRT5 (M) 8″ B-VENT TEE 8″x 8″x 5″ EA 1
BV8BRT6 (M) 8″ B-VENT TEE 8″x 8″x 6″ EA 1
BV8BSA 8″ B-VENT SUPPORT ASSY EA 3
BV8BSC 8″ B-VENT STORM CLLR EA 4
BV8BT 8″ B-VENT TEE EA 2
BV8BTF 8″ B-VENT T/CONE FLASHING EA 2
BV8BTK (M) 8″ B-VENT TEE CAP EA 2
BV8BWB (M) 8″ B-VENT WALL BAND EA 2
BV8BTFAL1 (M) 8″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 10″

Part Number Description UOM Ctn.Qty
BV1010BTY (M) 10″ B-VENT TY 10″x 10″x 10″ EA 1
BV104BTY (M) 10″ B-VENT TY 10″x 10″x 4″ EA 1
BV105BTY (M) 10″ B-VENT TY 10″x 10″x 5″ EA 1
BV106BTY (M) 10″ B-VENT TY 10″x 10″x 6″ EA 1
BV107BTY (M) 10″ B-VENT TY 10″x 10″x 7″ EA 1
BV108BTY (M) 10″ B-VENT TY 10″x 10″x 8″ EA 1
BV10B2 10″ B-VENT 18″ PIPE EA 4
BV10B3 10″ B-VENT 36″ PIPE EA 6
BV10BA 10″ B-VENT 18″ ADJ LENGTH EA 4
BV10BAF (M) 10″ B-VENT ADJ FLSH 6″/12″- 1″/1″ EA 1
BV10BAFP (M) 10″ B-VENT ADJ FLSH 7″/12″- 12″ EA 1
BV10BDC 10″ B-VENT DRAFT HOOD CONN EA 4
BV10BE 10″ B-VENT 90DEG EL FIXED EA 3
BV10BE5 10″ B-VENT 45DEG EL FIXED EA 4
BV10BFS 10″ B-VENT FIRESTOP SPACER EA 4
BV10BI12 (M) 10″- 12″ B-VENT INCREASER EA 1
BV10BI14 (M) 10″- 14″ B-VENT INCREASER EA 2
BV10BI6 (M) 6″- 10″ B-VENT INCREASER EA 1
BV10BI7 (M) 7″- 10″ B-VENT INCREASER EA 1
BV10BRC 10″ B-VENT RAIN CAP EA 3
BV10BRT6 (M) 10″ B-VENT TEE 10″x 10″x 6″ EA 1
BV10BRT8 (M) 10″ B-VENT TEE 10″x 10″x 8″ EA 1
BV10BSA 10″ B-VENT SUPPORT ASSY EA 4
BV10BSC 10″ B-VENT STORM COLR EA 4
BV10BT 10″ B-VENT TEE EA 3
BV10BTF 10″ B-VENT T/CONE FLASHING EA 2
BV10BTK 10″ B-VENT TEE CAP EA 2
BV10BWB (M) 10″ B-VENT WALL BAND EA 3
BV10BTFAL1 (M) 10″ 1PC AL T/CONE FLASHING EA 1

 

B-VENT 12″

Part Number Description UOM Ctn.Qty
BV1210BTY (M) 12″ B-VENT TY 12″x 12″x 10″ EA 1
BV1212BTY (M) 12″ B-VENT TY 12″x 12″x 12″ EA 1
BV126BTY (M) 12″ B-VENT TY 12″x 12″x 6″ EA 1
BV127BTY (M) 12″ B-VENT TY 12″x 12″x 7″ EA 1
BV128BTY (M) 12″ B-VENT TY 12″x 12″x 8″ EA 1
BV12B2 12″ B-VENT 18″ PIPE EA 3
BV12B3 12″ B-VENT 36″ PIPE EA 4
BV12BA 12″ B-VENT 18″ ADJ LENGTH EA 3
BV12BAF (M) 12″ B-VENT ADJ FLSH 1″/12″-6″ EA 1
BV12BDC 12″ B-VENT DRAFT HOOD CONN EA 3
BV12BE 12″ B-VENT 90DEG EL FIXED EA 2
BV12BE5 12″ B-VENT 45DEG EL FIXED EA 4
BV12BFS 12″ B-VENT FIRESTOP SPACER EA 4
BV12BI14 (M) 12″- 14″ B-VENT INCREASER EA 1
BV12BRC 12″ B-VENT RAIN CAP EA 2
BV12BRT10 (M) 12″ B-VENT TEE 12″x 12″x 10″ EA 1
BV12BRT6 (M) 12″ B-VENT TEE 12″x 12″x 6″ EA 1
BV12BRT8 (M) 12″ B-VENT TEE 12″x 12″x 8″ EA 1
BV12BSA 12″ B-VENT SUPPORT ASSY EA 4
BV12BSC 12″ B-VENT STORM CLLR EA 4
BV12BT 12″ B-VENT TEE EA 1
BV12BTF 12″ B-VENT T/CONE FLASHING EA 2
BV12BTK 12″ B-VENT TEE CAP EA 1
BV12BWB (M) 12″ B-VENT WALL BAND EA 1

 

B-VENT 14″

Part Number Description UOM Ctn.Qty
BV1410BTY (M) 14″ B-VENT TY 14″x 14″x 10″ EA 1
BV1412BTY (M) 14″ B-VENT TY 14″x 14″x 12″ EA 1
BV1414BTY (M) 14″ B-VENT TY 14″x 14″x 14″ EA 1
BV146BTY (M) 14″ B-VENT TY 14″x 14″x 6″ EA 1
BV148BTY (M) 14″ B-VENT TY 14″x 14″x 8″ EA 1
BV14B2 14″ B-VENT 18″ PIPE EA 6
BV14B3 14″ B-VENT 36″ PIPE EA 3
BV14BA 14″ B-VENT 18″ ADJ LENGTH EA 6
BV14BAF (M) 14″ B-VENT ADJ FLSH 1″/12″-6″ EA 1
BV14BDC 14″ B-VENT DRAFT HOOD CONN EA 5
BV14BE 14″ B-VENT 90DEG EL FIXED EA 4
BV14BE5 14″ B-VENT 45DEG EL FIXED EA 4
BV14BFS (M) 14″ B-VENT FIRESTOP SPACER EA 6
BV14BI16 (M) 14″- 16″ B-VENT INCREASER EA 1
BV14BRC 14″ B-VENT RC EA 2
BV14BRT10 (M) 14″ B-VENT TEE 14″x 14″x 10″ EA 2
BV14BRT12 (M) 14″ B-VENT TEE 14″x 14″x 12″ EA 2
BV14BRT6 (M) 14″ B-VENT TEE 14″x 14″x 6″ EA 1
BV14BRT8 (M) 14″ B-VENT TEE 14″x 14″x 8″ EA 1
BV14BSA (M) 14″ B-VENT SUPPORT ASSY EA 4
BV14BSC 14″ B-VENT STORM CLLR EA 4
BV14BT (M) 14″ B-VENT TEE EA 4
BV14BTF 14″ B-VENT T/CONE FLASHING EA 2
BV14BTK (M) 14″ B-VENT TEE CAP EA 2
BV14BWB (M) 14″ B-VENT WALL BAND EA 2

 

B-VENT 16″

Part Number Description UOM Ctn.Qty
BV1610BTY (M) 16″ B-VENT TY 16″x 16″x 10″ EA 1
BV1612BTY (M) 16″ B-VENT TY 16″x 16″x 12″ EA 1
BV1614BTY (M) 16″ B-VENT TY 16″x 16″x 14″ EA 1
BV1616BTY (M) 16″ B-VENT TY 16″x 16″x 16″ EA 1
BV168BTY (M) 16″ B-VENT TY 16″x 16″x 8″ EA 1
BV16B2 (M) 16″ B-VENT 18″ PIPE EA 1
BV16B3 (M) 16″ B-VENT 36″ PIPE EA 1
BV16BA (M) 16″ B-VENT 18″ ADJ LENGTH EA 1
BV16BAF (M) 16″ B-VENT ADJ ROOF FLSH EA 1
BV16BDC (M) 16″ B-VENT DRAFT HOOD CONN EA 1
BV16BE5 (M) 16″ B-VENT 45DEG EL FIXED EA 1
BV16BFS (M) 16″ B-VENT FIRE STOP SPACER EA 1
BV16BI18 (M) 16″- 18″ B-VENT INCREASER EA 1
BV16BRC (M) 16″ B-VENT RC EA 1
BV16BRT10 (M) 16″ B-VENT TEE 16″x 16″x 10″ EA 1
BV16BRT12 (M) 16″ B-VENT TEE 16″x 16″x 12″ EA 1
BV16BRT14 (M) 16″ B-VENT TEE 16″x 16″x 14″ EA 1
BV16BRT6 (M) 16″ B-VENT TEE 16″x 16″x 6″ EA 1
BV16BSA (M) 16″ B-VENT SUPPORT ASSY EA 1
BV16BSC (M) 16″ B-VENT STORM CLLR EA 1
BV16BT (M) 16″ B-VENT TEE EA 1
BV16BTF (M) 16″ B-VENT T/CONE FLASHING EA 1
BV16BTK (M) 16″ B-VENT TEE CAP EA 1

 

B-VENT 18″

Part Number Description UOM Ctn.Qty
BV1810BTY (M) 18″ B-VENT TY 18″x 18″x 10″ EA 1
BV1812BTY (M) 18″ B-VENT TY 18″x 18″x 12″ EA 1
BV1814BTY (M) 18″ B-VENT TY 18″x 18″x 14″ EA 1
BV1816BTY (M) 18″ B-VENT TY 18″x 18″x 16″ EA 1
BV1818BTY (M) 18″ B-VENT TY 18″x 18″x 18″ EA 1
BV18B2 (M) 18″ B-VENT 18″ PIPE EA 1
BV18B3 (M) 18″ B-VENT 36″ PIPE EA 1
BV18BA (M) 18″ B-VENT 18″ ADJ LENGTH EA 1
BV18BAF (M) 18″ B-VENT ADJ ROOF FLSH EA 1
BV18BDC (M) 18″ B-VENT DRAFT HOOD CONN EA 1
BV18BE5 (M) 18″ B-VENT 45DEG EL FIXED EA 1
BV18BFS (M) 18″ B-VENT FIRE STOP SPACER EA 1
BV18BI20 (M) 18″- 20″ B-VENT INCREASER EA 1
BV18BRC (M) 18″ B-VENT RC EA 1
BV18BRT10 (M) 18″ B-VENT TEE 18″x 18″x 10″ EA 1
BV18BRT12 (M) 18″ B-VENT TEE 18″x 18″x 12″ EA 1
BV18BRT14 (M) 18″ B-VENT TEE 18″x 18″x 14″ EA 1
BV18BRT16 (M) 18″ B-VENT TEE 18″x 18″x 16″ EA 1
BV18BSA (M) 18″ B-VENT SUPPORT ASSY EA 1
BV18BSC (M) 18″ B-VENT STORM CLLR EA 1
BV18BT (M) 18″ B-VENT TEE EA 1
BV18BTF (M) 18″ B-VENT T/CONE FLASHING EA 1
BV18BTK (M) 18″ B-VENT TEE CAP EA 1

 

B-VENT 20″

Part Number Description UOM Ctn.Qty
BV2012BTY (M) 20″ B-VENT TY 20″x 20″x 12″ EA 1
BV2014BTY (M) 20″ B-VENT TY 20″x 20″x 14″ EA 1
BV2018BTY (M) 20″ B-VENT TY 20″x 20″x 18″ EA 1
BV2020BTY (M) 20″ B-VENT TY 20″x 20″x 20″ EA 1
BV20B2 (M) 20″ B-VENT 18″ PIPE EA 1
BV20B3 (M) 20″ B-VENT 36″ PIPE EA 1
BV20BA (M) 20″ B-VENT 18″ ADJ LENGTH EA 1
BV20BAF (M) 20″ B-VENT ADJ ROOF FLSH EA 1
BV20BDC (M) 20″ B-VENT DRAFT HOOD CONN EA 1
BV20BE5 (M) 20″ B-VENT 45DEG EL FIXED EA 1
BV20BFS (M) 20″ B-VENT FIRE STOP SPACER EA 1
BV20BI22 (M) 20″- 22″ B-VENT INCREASER EA 1
BV20BRC (M) 20″ B-VENT RC EA 1
BV20BRT10 (M) 20″ B-VENT TEE 20″x 20″x 10″ EA 1
BV20BRT12 (M) 20″ B-VENT TEE 20″x 20″x 12″ EA 1
BV20BRT14 (M) 20″ B-VENT TEE 20″x 20″x 14″ EA 1
BV20BRT16 (M) 20″ B-VENT TEE 20″x 20″x 16″ EA 1
BV20BRT18 (M) 20″ B-VENT TEE 20″x 20″x 18″ EA 1
BV20BSA (M) 20″ B-VENT SUPPORT ASSY EA 1
BV20BSC (M) 20″ B-VENT STORM CLLR EA 1
BV20BT (M) 20″ B-VENT TEE EA 1
BV20BTF (M) 20″ B-VENT T/CONE FLASHING EA 1
BV20BTK (M) 20″ B-VENT TEE CAP EA 1

 

B-VENT 22″

Part Number Description UOM Ctn.Qty
BV2210BTY (M) 22″ B-VENT TY 22″x 22″x 10″ EA 1
BV2212BTY (M) 22″ B-VENT TY 22″x 22″x 12″ EA 1
BV2214BTY (M) 22″ B-VENT TY 22″x 22″x 14″ EA 1
BV2216BTY (M) 22″ B-VENT TY 22″x 22″x 16″ EA 1
BV2218BTY (M) 22″ B-VENT TY 22″x 22″x 18″ EA 1
BV22B2 (M) 22″ B-VENT 18″ PIPE EA 1
BV22B3 (M) 22″ B-VENT 36″ PIPE EA 1
BV22BA (M) 22″ B-VENT 18″ ADJ LENGTH EA 1
BV22BAF (M) 22″ B-VENT ADJ ROOF FLSH EA 1
BV22BDC (M) 22″ B-VENT DRAFT HOOD CONN EA 1
BV22BE5 (M) 22″ B-VENT 45DEG EL FIXED EA 1
BV22BFS (M) 22″ B-VENT FIRE STOP SPACER EA 1
BV22BI24 (M) 22″- 24″ B-VENT INCREASER EA 1
BV22BRC (M) 22″ B-VENT RC EA 1
BV22BRT14 (M) 22″ B-VENT TEE 22″x 22″x 14″ EA 1
BV22BSA (M) 22″ B-VENT SUPPORT ASSY EA 1
BV22BSC (M) 22″ B-VENT STORM CLLR EA 1
BV22BTF (M) 22″ B-VENT T/CONE FLASHING EA 1
BV22BTK (M) 22″ B-VENT TEE CAP EA 1

 

B-VENT 24″

Part Number Description UOM Ctn.Qty
BV2414BTY (M) 24″ B-VENT TY 24″x 24″x 14″ EA 1
BV2416BTY (M) 24″ B-VENT TY 24″x 24″x 16″ EA 1
BV24B2 (M) 24″ B-VENT 18″ PIPE EA 1
BV24B3 (M) 24″ B-VENT 36″ PIPE EA 1
BV24BA (M) 24″ B-VENT 18″ ADJ LENGTH EA 1
BV24BAF (M) 24″ B-VENT ADJ ROOF FLSH EA 1
BV24BDC (M) 24″ B-VENT DRAFT HOOD CONN EA 1
BV24BE5 (M) 24″ B-VENT 45DEG EL FIXED EA 1
BV24BFS (M) 24″ B-VENT FIRESTOP SPACER EA 1
BV24BI26 (M) 24″- 26″ B-VENT INCREASER EA 1
BV24BRC (M) 24″ B-VENT RC EA 1
BV24BRT12 (M) 24″ B-VENT TEE 24″x 24″x 12″ EA 1
BV24BRT14 (M) 24″ B-VENT TEE 24″x 24″x 14″ EA 1
BV24BRT16 (M) 24″ B-VENT TEE 24″x 24″x 16″ EA 1
BV24BSA (M) 24″ B-VENT SUPPORT ASSY EA 1
BV24BSC (M) 24″ B-VENT STORM CLLR EA 1
BV24BT (M) 24″ B-VENT TEE EA 1
BV24BTF (M) 24″ B-VENT T/CONE FLASHING EA 1
BV24BTK (M) 24″ B-VENT TEE CAP EA 1

 

B-VENT 26″

Part Number Description UOM Ctn.Qty
BV26B2 (M) 26″ B-VENT 18″ PIPE EA 1
BV26B3 (M) 26″ B-VENT 36″ PIPE EA 1
BV26BA (M) 26″ B-VENT 18″ ADJ LENGTH EA 1
BV26BDC (M) 26″ B-VENT DRAFT HOOD CONN EA 1
BV26BE5 (M) 26″ B-VENT 45DEG EL FIXED EA 1
BV26BFS (M) 26″ B-VENT FIRESTOP SPACER EA 1
BV26BI28 (M) 26″- 28″ B-VENT INCREASER EA 1
BV26BRC (M) 26″ B-VENT RC EA 1
BV26BSC (M) 26″ B-VENT STORM CLLR EA 1
BV26BT (M) 26″ B-VENT TEE EA 1
BV26BTF (M) 26″ B-VENT T/CONE FLASHING EA 1
BV26BTK (M) 26″ B-VENT TEE CAP EA 1

 

B-VENT 28″

Part Number Description UOM Ctn.Qty
BV28B2 (M) 28″ B-VENT 18″ PIPE EA 1
BV28B3 (M) 28″ B-VENT 36″ PIPE EA 1
BV28BA (M) 28″ B-VENT 18″ ADJ LENGTH EA 1
BV28BDC (M) 28″ B-VENT DRAFT HOOD CONN EA 1
BV28BE5 (M) 28″ B-VENT 45DEG EL FIXED EA 1
BV28BFS (M) 28″ B-VENT FIRESTOP SPACER EA 1
BV28BRC (M) 28″ B-VENT RC EA 1
BV28BSA (M) 28″ B-VENT SUPPORT ASSY EA 1
BV28BSC (M) 28″ B-VENT STORM CLLR EA 1
BV28BT (M) 28″ B-VENT TEE EA 1
BV28BTF (M) 28″ B-VENT T/CONE FLASHING EA 1
BV28BTK (M) 28″ B-VENT TEE CAP EA 1

 

B-VENT 30″

Part Number Description UOM Ctn.Qty
BV30B2 (M) 30″ B-VENT 18″ PIPE EA 1
BV30B3 (M) 30″ B-VENT 36″ PIPE EA 1
BV30BA (M) 30″ B-VENT 18″ ADJ LENGTH EA 1
BV30BAF (M) 30″ B-VENT ADJ ROOF FLSH EA 1
BV30BDC (M) 30″ B-VENT DRAFT HOOD CONN EA 1
BV30BE5 (M) 30″ B-VENT 45DEG EL FIXED EA 1
BV30BFS (M) 30″ B-VENT FIRESTOP SPACER EA 1
BV30BRC (M) 30″ B-VENT RC EA 1
BV30BSA (M) 30″ B-VENT SUPPORT ASSY EA 1
BV30BSC (M) 30″ B-VENT STORM CLLR EA 1
BV30BTF (M) 30″ B-VENT T/CONE FLASHING EA 1

 

B-VENT 32″

Part Number Description UOM Ctn.Qty
BV3218 (M) 32″ B-VENT 18″ PIPE EA 1
BV3236 (M) 32″ B-VENT 36″ PIPE EA 1
BV32RC (M) 32″ B-VENT RC EA 1
BV32SC (M) 32″ B-VENT STORM CLLR EA 1
BV32TCF (M) 32″ B-VENT T/CONE FLASHING EA 1

 

B-VENT 34″

Part Number Description UOM Ctn.Qty
BV3418 (M) 34″ B-VENT 18″ PIPE EA 1
BV3424 (M) 34″ B-VENT 24″ PIPE EA 1
BV3436 (M) 34″ B-VENT 36″ PIPE EA 1
BV34ARF (M) 34″ B-VENT ADJ ROOF FLSH EA 1
BV34DHC (M) 34″ B-VENT DRAFT HOOD CONN EA 1
BV34FS (M) 34″ B-VENT FIRESTOP SPACER EA 1
BV34RC (M) 34″ B-VENT RC EA 1
BV34SC (M) 34″ B-VENT STORM CLLR EA 1
BV34TCF (M) 34″ B-VENT T/CONE FLASHING EA 1

 

B-VENT 36″

Part Number Description UOM Ctn.Qty
BV3636 (M) 36″ B-VENT 36″ PIPE EA 1
BV36RC (M) 36″ B-VENT RC EA 1
BV36TC (M) 36″ B-VENT TEE CAP EA 1

 

B-VENT INSULATED 4″

Part Number Description UOM Ctn.Qty
IBV4B1 (M) 4″ INS B-VENT 12″ PIPE EA 2
IBV4B3 (M) 4″ INS B-VENT 36″ PIPE EA 1
IBV4B5 (M) 4″ INS B-VENT 60″ PIPE EA 1
IBV4BBC (M) 4″ INS B-VENT BOTTOM CAP EA 1
IBV4BCC (M) 4″ INS B-VENT CHASE CAP EA 1
IBV4BCH (M) 4″ INS B-VENT 48″ CHASE EA 1
IBV4BE5 (M) 4″ INS B-VENT 45DEG EL EA 2
IBV4BT (M) 4″ INS B-VENT TEE EA 1
IBV4BTS (M) 4″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 5″

Part Number Description UOM Ctn.Qty
IBV5B1 (M) 5″ INS B-VENT 12″ PIPE EA 1
IBV5B3 (M) 5″ INS B-VENT 36″ PIPE EA 1
IBV5B5 (M) 5″ INS B-VENT 60″ PIPE EA 1
IBV5BBC (M) 5″ INS B-VENT BOTTOM CAP EA 1
IBV5BCC (M) 5″ INS B-VENT CHASE CAP EA 1
IBV5BCH (M) 5″ INS B-VENT 48″ CHASE EA 1
IBV5BE5 (M) 5″ INS B-VENT 45DEG EL EA 2
IBV5BT (M) 5″ INS B-VENT TEE EA 1
IBV5BTS (M) 5″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 6″

Part Number Description UOM Ctn.Qty
IBV6B1 (M) 6″ INS B-VENT 12″ PIPE EA 3
IBV6B3 (M) 6″ INS B-VENT 36″ PIPE EA 2
IBV6B5 (M) 6″ INS B-VENT 60″ PIPE EA 1
IBV6BE5 (M) 6″ INS B-VENT 45DEG EL EA 3
IBV6BT (M) 6″ INS B-VENT TEE EA 1
IBV6BTS (M) 6″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 7″

Part Number Description UOM Ctn.Qty
IBV7B1 (M) 7″ INS B-VENT 12″ PIPE EA 1
IBV7B3 (M) 7″ INS B-VENT 36″ PIPE EA 2
IBV7B5 (M) 7″ INS B-VENT 60″ PIPE EA 1
IBV7BBC (M) 7″ INS B-VENT BOTTOM CAP EA 1
IBV7BT (M) 7″ INS B-VENT TEE EA 1
IBV7BTS (M) 7″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 8″

Part Number Description UOM Ctn.Qty
IBV8B1 (M) 8″ INS B-VENT 12″ PIPE EA 1
IBV8B3 (M) 8″ INS B-VENT 36″ PIPE EA 1
IBV8B5 (M) 8″ INS B-VENT 60″ PIPE EA 1
IBV8BBC (M) 8″ INS B-VENT BOTTOM CAP EA 1
IBV8BCC (M) 8″ INS B-VENT CHASE CAP EA 1
IBV8BCH (M) 8″ INS B-VENT 48″ CHASE EA 1
IBV8BE5 (M) 8″ INS B-VENT 45DEG EL EA 2
IBV8BT (M) 8″ INS B-VENT TEE EA 1
IBV8BTS (M) 8″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 10″

Part Number Description UOM Ctn.Qty
IBV10B2 (M) 10″ INS B-VENT 18″ PIPE EA 2
IBV10B3 (M) 10″ INS B-VENT 36″ PIPE EA 4
IBV10BBC (M) 10″ INS B-VENT BOTTOM CAP EA 1
IBV10BCC (M) 10″ INS B-VENT CHASE CAP EA 1
IBV10BCH (M) 10″ INS B-VENT 48″ CHASE EA 1
IBV10BE5 (M) 10″ INS B-VENT 45DEG EL EA 2
IBV10BT (M) 10″ INS B-VENT TEE EA 1
IBV10BTS (M) 10″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 12″

Part Number Description UOM Ctn.Qty
IBV12B2 (M) 12″ INS B-VENT 18″ PIPE EA 1
IBV12B3 (M) 12″ INS B-VENT 36″ PIPE EA 3
IBV12BE5 (M) 12″ INS B-VENT 45DEG EL EA 1
IBV12BT (M) 12″ INS B-VENT TEE EA 1
IBV12BTS (M) 12″ INS B-VENT TSUPPORT EA 1

 

B-VENT INSULATED 14″

Part Number Description UOM Ctn.Qty
IBV14B2 (M) 14″ INS B-VENT 18″ PIPE EA 1
IBV14B3 (M) 14″ INS B-VENT 36″ PIPE EA 3
IBV14BBC (M) 14″ INS B-VENT BOTTOM CAP EA 1
IBV14BCC (M) 14″ INS B-VENT CHASE CAP EA 1
IBV14BCH (M) 14″ INS B-VENT 48″ CHASE EA 1
IBV14BE5 (M) 14″ INS B-VENT 45DEG EL EA 1
IBV14BT (M) 14″ INS B-VENT TEE EA 1
IBV14BTS (M) 14″ INS B-VENT TSUPPORT EA 1

Related Products

A-Vent

A-Vent

Intended for use with certain process equipment and large oil or gas burning heating appliances

Product Categories

Sheet Metal

Venting

Flexible Duct

Custom

OEM