Flashings are manufactured 28 gauge galvanized steel. Pitch Pocket design.
S Cleat
S Cleat
Description
S Cleats are manufactured using galvanized steel. Available in the following gauges: 24, 26, 28 & 30.
Applications
Used to secure two pieces of duct together.
Features & Benefits
– Fully automated process ensures consistency
– Union Made
Part Number Table
| 24 GAUGE |
| Part Number | Description | UOM | Ctn.Qty |
| 5CSF12024 | (M) 120″ S CLEAT 24GA | LT | 10 |
| 26 GAUGE |
| Part Number | Description | UOM | Ctn.Qty |
| 5CSF6026 | 60″ S CLEAT 26GA | LT | 20 |
| 5CSF12026 | 120″ S CLEAT 26GA | LT | 10 |
| 28 GAUGE |
| Part Number | Description | UOM | Ctn.Qty |
| 5CDR0828 | 8″ D CLEAT 28GA RD | LT | 50 |
| 5CDR1028 | (M) 10″ D CLEAT 28GA RD | LT | 50 |
| 5CDR1228 | (M) 12″ D CLEAT 28GA RD | LT | 50 |
| 5CSF6028 | 60″ S CLEAT 28GA | LT | 20 |
| 30 GAUGE |
| Part Number | Description | UOM | Ctn.Qty |
| 5CDR0830 | (M) 8″ D CLEAT 30GA RD | LT | 50 |
| 5CDR1030 | (M) 10″ D CLEAT 30GA RD | LT | 200 |
| 5CSF6030 | 60″ S CLEAT 30GA | LT | 20 |
Related Products
Take Off Side
Side Take Offs are manufactured using either standard gauge or 30 gauge galvanized steel and are available in 90 degree and 45 degree configurations.
Stack Duct
Stack duct is manufactured from galvanized steel.
Reducer – Plain
Connects pipe of different diameters where air flows from larger into smaller diameter pipe.